Multistage horizontal pumps type MT – production Turbo-S Ltd.
Horizontal multistage pumps, manufacturer Turbo-S Ltd, Bulgaria
The centrifugal multistage pumps MT are intended to handle pure water and other solids-free liquids with viscosity and chemical aggressiveness similar to water, with maximal temperature 80oC.
They find application in water supply, irrigation, in industry and agriculture.
Pumps type MT are mounted on a common metal frame with the engine.
Joining – via a flexible pallet clutch.
Shaft Seal Gasket.
Material of the main parts – gray cast iron.
Pumps directly from the manufacturer!
Spare parts available in stock.
Maximum flow rate up to: from 2 l / sec to 30 l / sec (108 m3 / hour)
Maximum total head up to: 330 meters water column (33 bars)
Temperature range: up to + 80 ° C
Version type MP – horizontal multistage feeding pumps for water temperature up to + 120 ° С.
Version type – MC type – self-priming multistage pumps, with built-in self-priming step.
Description: The pumps are with single flow impellers mounted on a common shaft that rests in radial ball and roller bearings fixed in bearing housings.
The sealing of the shaft effected by soft packing or by mechanical front seal housed in the stuffing boxes of the discharge body , and the suction body .
The sealing between the casing details is by “O”-rings made of oil-resistant rubber.
The stuffing boxes of the suction and the discharge body are inter connected by piping in order to equalize the pressure.
